Cisco Catalyst 3550 Command Reference Manual page 484

show parser macro
auto qos voip trust
# Allow port channels to be automatically formed
channel-protocol pagp
This is an example of output from the show parser macro brief command:
Switch# show parser macro brief
This is an example of output from the show parser description command:
Switch# show parser macro description
Global Macro(s): cisco-global
Interface
--------------------------------------------------------------
Fa0/1
Fa0/2
--------------------------------------------------------------
This is an example of output from the show parser description interface command:
Switch# show parser macro description interface fastethernet0/2
Interface
--------------------------------------------------------------
Fa0/2
--------------------------------------------------------------
Related Commands Command
macro apply
macro description
macro global
macro global
description
macro name
show running-config
Catalyst 3550 Multilayer Switch Command Reference
2-458
default global : cisco-global
default interface: cisco-desktop
default interface: cisco-phone
default interface: cisco-switch
default interface: cisco-router
customizable : snmp
Macro Description(s)
standard-switch10
this is test macro
Macro Description
this is test macro
Description
Applies a macro on an interface or applies and traces a macro on an interface.
Adds a description about the macros that are applied to an interface.
Applies a macro on a switch or applies and traces a macro on a switch.
Adds a description about the macros that are applied to the switch.
Creates a macro.
Displays the current operating configuration, including defined macros. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides and
Command References > Cisco IOS Configuration Fundamentals Command
Reference, Release 12.2 > File Management Commands > Configuration
File Management Commands.
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
OL-8566-01