Debug Gigastack - Cisco Catalyst 3550 Command Reference Manual

Appendix B Catalyst 3550 Switch Debug Commands

debug gigastack

Use the debug gigastack privileged EXEC command to enable debugging of the driver actions for the
GigaStack Gigabit Interface Converter (GBIC). Use the no form of this command to disable debugging.
Syntax Description
This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines The undebug gigastack command is the same as the no debug gigastack command.
Related Commands Command
show debugging
OL-8566-02
debug gigastack
no debug gigastack
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Catalyst 3550 Multilayer Switch Command Reference
debug gigastack
B-15