Debug Pbr - Cisco Catalyst 3550 Command Reference Manual

debug pbr

debug pbr
Use the debug pbr privileged EXEC command to enable debugging of policy-based routing (PBR)
events. Use the no form of this command to disable debugging.
Syntax Description
acl-merge
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(13)EA1
Usage Guidelines The undebug pbr command is the same as the no debug pbr command.
Catalyst 3550 Multilayer Switch Command Reference
B-30
debug pbr [acl-merge]
no debug pbr [acl-merge]
(Optional) Display debug messages for the merge of ACLs present in a
route-map that are applied to an interface for PBR.
Modification
This command was introduced.
Appendix B Catalyst 3550 Switch Debug Commands
OL-8566-02