Show Flowcontrol - Cisco Catalyst 3550 Command Reference Manual

show flowcontrol

show flowcontrol
Use the show flowcontrol user EXEC command to display the flow control status and statistics.
Syntax Description interface interface-id
module module-number (Optional) Display the flow control status and statistics for all interfaces. The
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.1(14)EA1
Usage Guidelines Use this command to display the flow control status and statistics on the switch or about a specific
interface.
Use the show flowcontrol command to display information about all the switch interfaces. The output
from the show flowcontrol command is the same as the output from the show flowcontrol module
module-number command.
Use the show flowcontrol interface interface-id command to display information about the Gigabit
Ethernet interfaces on the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show flowcontrol command:
Switch> show flowcontrol
Port
---------
Gi0/1
Gi0/2
<output truncated>
This is an example of output from the show flowcontrol interface interface-id command:
Switch> show flowcontrol gigabitethernet0/2
Port
Catalyst 3550 Multilayer Switch Command Reference
2-358
show flowcontrol [interface interface-id | module module-number] [ | {begin | exclude | include}
expression]
(Optional) Display the flow control status and statistics for a specific
interface.
only valid module-slot value is 0.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Send FlowControl
admin oper
-------- -------- -------- --------
Unsupp. Unsupp.
desired off
Send FlowControl
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
Receive FlowControl RxPause TxPause
admin oper
------- -------
off off 0
off off 0
Receive FlowControl RxPause TxPause
0
0
OL-8566-01