Show Boot - Cisco Catalyst 3550 Command Reference Manual

show boot

show boot
Use the show boot privileged EXEC command to display the settings of the boot environment variables.
Syntax Description
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.1(4)EA1
12.1(11)EA1
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Note Only the Cisco IOS software can read and write a copy of the private configuration file. You cannot read,
write, delete, or display a copy of this file.
Examples This is an example of output from the show boot command.
display.
Switch# show boot
BOOT path-list:
flash:c3550-ipservices-mz-122-25.SEB/c3550-ipservices-mz-122-25.SEB.bin
Config file:
Private Config file: flash:private-config.text
Enable Break:
Manual Boot:
HELPER path-list:
NVRAM/Config file
Catalyst 3550 Multilayer Switch Command Reference
2-320
show boot [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
The Private Config file field description was added.
flash:config.text
no
yes
buffer size: 32768
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
Table 2-14 describes each field in the
OL-8566-01