Cisco Catalyst 3550 Command Reference Manual page 469

Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
Table 2-24 show mls qos interface statistics Field Descriptions
Ingress
Egress
WRED drop counts
Related Commands Command
mls qos monitor
OL-8566-01
Field
incoming
no_change
classified
policed
dropped (in bytes)
incoming
no_change
classified
policed
dropped (in bytes)
qid
thresh1 and thresh2
FreeQ
Description
Number of packets or bytes with a specific DSCP entering the ingress
QoS process.
Number of packets or bytes for which the DSCP value did not change
after classification.
Number of packets or bytes classified to this DSCP value.
Number of packets or bytes marked down from this DSCP value.
Number of packets or bytes dropped by policing.
Number of packets or bytes with a specific DSCP entering the egress
QoS process.
Number of packets with a specific DSCP that did not change.
Number of packets with a specific DSCP that were classified according
to the class map.
Number of packets or bytes marked down from this DSCP.
Number of packets or bytes of this DSCP dropped.
Queue number.
Number of DSCPs of a specific value dropped at threshold 1 and
threshold 2.
Amount of free queue space available per queue.
Description
Defines up to 16 DSCP values for which byte or packet statistics are
gathered by hardware.
Catalyst 3550 Multilayer Switch Command Reference
show mls qos interface
2-443