Archive Upload-Sw - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

archive upload-sw

Use the archive upload-sw privileged EXEC command to upload an existing Long-Reach Ethernet
(LRE) switch image to a server.
This command is supported only on Catalyst 2950 LRE switches.
Syntax Description
/version version_string
destination-url
Defaults
The switch uploads the currently running image from the flash: file system.
Command Modes Privileged EXEC
Command History Release
12.1(11)YJ
Usage Guidelines
Use the upload feature only if the files associated with the device manager have been installed with the
existing image.
The files are uploaded in this sequence: info, the software image, the device manager files, LRE binary
files, and info.ver. After these files are uploaded, the software creates the tar file.
Image names are case sensitive.
OL-10102-01
archive upload-sw [/version version_string] destination-url
(Optional) Specify the version string of the image to be uploaded.
The destination URL alias for a local or network file system. These options
are supported:
•
•
•
•
The image-name.tar is the name of software image to be stored on the
server.
Modification
This command was introduced.
The syntax for the local flash file system:
flash:
The syntax for the FTP:
ftp:[[//username[:password]@location]/directory]/image-name.tar
The syntax for the Remote Copy Protocol (RCP):
rcp:[[//username@location]/directory]/image-name.tar
The syntax for the TFTP:
tftp:[[//location]/directory]/image-name.tar
Catalyst 2950 and Catalyst 2955 Switch Command Reference
archive upload-sw
2-15