Sensor Assy Cru - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.69 Sensor Assy CRU

4.2.69.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Cover Rear (Section 4.2.12).
4. Remove the Cover Assy I/F (Section 4.2.2).
5. Remove the Cover Left (Section 4.2.1).
6. Remove the Cover Assy Top (Section 4.2.7).
7. Remove the Plate Assy Left (Section 4.2.70).
8. Remove the CRU Top Guide Assy (Section 4.2.66).
9. Release the harness of Sensor Assy CRU from three clamps of CRU Top
Guide Assy.
10. Deflecting the right bracket of CRU Top Guide Assy with a small
screwdriver, draw off the right shaft of Sensor Assy CRU.
11. Draw the left shaft of Sensor Assy CRU from the hole in the left bracket of
CRU Top Guide Assy.
4.2.69.2 Assembly
1. Insert the left shaft of Sensor Assy CRU into a hole in the left bracket of
CRU Top Guide Assy.
2. Deflecting the right bracket of CRU Top Guide Assy with a small
screwdriver, insert the right shaft of Sensor Assy CRU into a hole in the
right bracket of CRU Top Guide Assy.
3. Secure the harness of Sensor Assy CRU with three clamps of CRU Top
Guide Assy.
4. Mount the CRU Top Guide Assy (Section 4.2.66).
5. Mount the Plate Assy Left (Section 4.2.70).
6. Mount the Cover Assy Top (Section 4.2.7).
7. Mount the Cover Left (Section 4.2.1).
Disassembly and Assembly
8. Mount the Cover Assy I/F (Section 4.2.2).
9. Mount the Cover Rear (Section 4.2.12).
10. Mount the Cover Front L/H (Section 4.2.5).
11. Mount the Cover Assy Front (Section 4.2.3).
Disassembly and Assembly
Figure 4-89. Sensor Assy CRU Removal
Revision B
187