Main Switch - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.86 Main Switch

4.2.86.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Cover Assy I/F (Section 4.2.2).
4. Remove the Cover Left (Section 4.2.1).
5. Remove the Cover Assy Top (Section 4.2.7).
6. Remove the Plate Assy Left (Section 4.2.70).
7. Remove the Plate Handle (Section 4.2.72).
NOTE: In the following steps, do not detach the Main Switch and the
PWBA PS far away because they are connected with the
harness.
8. Remove the PWBA Assy (Section 4.2.85).
9. Push The rear of Main Switch so that it comes out of the front from the
printer.
4.2.86.2 Assembly
NOTE: Align the position exactly, mount the Main Switch on the
printer with its ON side up.
1. Align the Main Switch with it mount position to the printer.
2. Fit the Main Switch in the printer to secure.
3. Mount the PWBA Assy.
4. Mount the Plate Handle (Section 4.2.72).
5. Mount the Plate Assy Left (Section 4.2.70).
6. Mount the Cover Assy Top (Section 4.2.7).
7. Mount the Cover Left (Section 4.2.1).
Disassembly and Assembly
8. Mount the Cover Assy I/F (Section 4.2.2).
9. Mount the Cover Front L/H (Section 4.2.5).
10. Mount the Cover Assy Front (Section 4.2.3).
Disassembly and Assembly
Figure 4-106. Main Switch Removal
Revision B
207