Bearing Exit And Roll Assy Mid-2 - Epson EPL-N2050 Service Manual

EPSON EPL-N2050
4.2.60

Bearing Exit and Roll Assy MID-2

4.2.60.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Cover Rear (Section 4.2.12).
4. Remove the Cover Assy I/F (Section 4.2.2).
5. Remove the Cover Left (Section 4.2.1).
6. Remove the Cover Assy Top (Section 4.2.7).
7. Remove the Plate Assy left (Section 4.2.70).
8. Remove the Cover Interlock (Section 4.2.62).
9. Remove the Eliminator Assy Exit (Section 4.2.57).
10. Remove the Chute Assy Exit (Section 4.2.64).
11. Unhook the Gear Exit-17 secured to the upper Roll Assy MID-1 from the
Chute Assy Exit.
12. Draw the Gear Exit-17 from the upper Roll Assy MID-1.
13. Unhook the Gear Exit-17 secured to the Roll Assy MID-2 from the Chute
Assy Exit.
14. Draw the Gear Exit-17 from the Roll Assy MID-2.
15. Remove the Gear Exit-32 from the Chute Assy Exit.
16. Unhook the Bearing Exit that secures the left and right shafts of Roll Assy
MID-2 from the Chute Assy Exit.
17. Remove the Roll Assy MID-2 together with the left and right Bearing Exits
on the Roll Assy MID-2 from the Chute Assy Exit.
18. Draw the left and right Bearing Exits from the Roll Assy MID-2.
Disassembly and Assembly
Figure 4-79. Removal of Bearing Exit and Roll Assy MID-2
Disassembly and Assembly
Revision B
176