Removing The Detector Assy.,Hp; Removing The Sensor Assy.,Load; Figure 3-11. Removing The Detector Assy.,Hp; Figure 3-12. Removing The Sensor Assy.,Load - Epson DLQ-3000 Service Manual

3.2.6.2 Removing the DETECTOR ASSY.,HP

Remove the printer mechanism. (Refer to Section 3.2.6.1.)
Step 1 :
Push the notches (black) from the rear of the FRAME,CR. Then remove the DETECTOR
Step 2 :
DETECTOR ASSY.,HP

Figure 3-11. Removing the DETECTOR ASSY.,HP

3.2.6.3 Removing the SENSOR ASSY.,LOAD

Remove the printer mechanism. (Refer to Section 3.2.6.1)
Step 1 :
Step 2: Remove the screw CB (M2.5 x 5) which fixes the SENSOR ASSY.,LOAD to the LEVER
LEVER

Figure 3-12. Removing the SENSOR ASSY.,LOAD

Rev. A
Disassembly and Assembly
SENSOR ASSY.,LOAD
3-13