Gear Regi Metal - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.48 Gear Regi Metal

4.2.48.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Chute MBF Assy (Section 4.2.30).
4. Remove the Shaft 14 (Section 4.2.51).
5. Remove the Gear 14 (Section 4.2.51).
6. Remove the P/H Assy (Section 4.2.42).
7. Disengage the E-ring that secures the Gear Regi Metal from the P/H Assy.
8. Draw the Gear Regi Metal from the P/H Assy.
Figure 4-65. Gear Regi Metal Removal
Disassembly and Assembly
4.2.48.2 Assembly
1. Mount the Gear Regi Metal on the Roll Regi Metal from the P/H Assy.
2. Secure the Gear Regi Metal to the Roll Regi Metal of P/H Assy with the E-
ring.
3. Mount the P/H Assy (Section 4.2.42).
4. Mount the Gear 14 (Section 4.2.51).
5. Mount the Shaft 14 (Section 4.2.51).
6. Mount the Chute MBF Assy (Section 4.2.30).
7. Mount the Cover Front L/H (Section 4.2.5).
8. Mount the Cover Assy Front (Section 4.2.3).
Disassembly and Assembly
Revision B
162