Sensor Photo: Exit - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.61 Sensor Photo: Exit

4.2.61.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Cover Rear (Section 4.2.12).
4. Remove the Cover Assy Top (Section 4.2.7).
5. Remove the Eliminator Assy Exit (Section 4.2.57).
6. Remove the Actuator Full Stack (Section 4.2.58).
7. Unplug the connector (P/J311) on the Sensor Photo: Exit.
8. Disengage five hooks of Sensor Photo: Exit secured to the Chute Assy Exit
in the printer.
9. Remove the Sensor Photo: Exit from the Chute Assy Exit.
4.2.61.2 Assembly
1. Aligning the position exactly, mount the Sensor Photo: Exit on the Chute
Assy Exit in the printer.
2. Secure the Sensor Photo: Exit to the Chute Assy Exit with five hooks.
3. Plug the connector (P/J311) to the Sensor Photo: Exit.
4. Mount the Actuator Full Stack (Section 4.2.58).
5. Mount the Eliminator Assy Exit (Section 4.2.57).
6. Mount the Cover Assy Top (Section 4.2.7).
7. Mount the Cover Rear (Section 4.2.12).
8. Mount the Cover Front L/H (Section 4.2.5).
9. Mount the Cover Assy Front (Section 4.2.3).
Disassembly and Assembly Disassembly and Assembly
Figure 4-80. Sensor Photo: Exit
Revision B
178