Tray Assy Mbf - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.4 Tray Assy MBF

4.2.4.1 Removal
1. Open the Cover Assy Front.
2. Remove the Cover Assy Front (Section 4.2.3).
3. Disengage the Clip that secures the Stopper Tray to the Tray Assy MBF.
NOTE: In the following steps, do not detach Cover Assy Front and
Tray Assy MBF far away because they are linked with the
Stopper Tray.
4. Face the Cover Assy Front toward the rear, insert a small screwdriver into
a gap at the front right end between Cover Assy Front and Tray Assy MBF
to deflect the right side of Cover Assy Front, and disengage the boss.
5. Insert a small screwdriver into a gap at the front left end between Cover
Assy Front and Tray Assy MBF to deflect the left side of Cover Assy Front,
and disengage the boss, then detach the Tray Assy MBF.
6. Aligning the boss of Tray Assy MBF with a slit of Stopper Tray, remove
the Tray Assy MBF from the Cover Assy Front.
NOTE:
4.2.4.2 Assembly
1. Aligning the boss of Tray Assy MBF with a slit of Stopper Tray, mount the
Tray Assy MBF.
NOTE: In the following steps, do not detach Cover Assy Front and
Tray Assy MBF far away because they are linked with the
Stopper Tray.
2. Face the Cover Assy Front toward the rear, insert the left boss of Tray
Assy MBF into the left hole in the Cover Assy Front.
3. Insert a small screwdriver into a gap at the front right end between Cover
Assy Front and Tray Assy MBF to deflect the right side of Cover Assy
Front, and engage the boss at the front right end of Tray Assy MBF.
4. Secure the Stopper Tray to the shaft of Tray Assy MBF with the Clip.
Disassembly and Assembly
5. Mount the Cover Assy Front (Section 4.2.3).
6. Close the Cover Assy Front.
Disassembly and Assembly
Figure 4-5. Tray Assy MBF Removal
Revision B
107