Roll Regi Rubber - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.43 Roll Regi Rubber

4.2.43.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Chute MBF Assy (Section 4.2.30).
4. Remove the Shaft 14 (Section 4.2.51).
5. Remove the Gear 14 (Section 4.2.51).
6. Remove the P/H Assy (Section 4.2.42).
7. Remove the Spring Regi (Section 4.2.47).
8. Remove the Gear Regi Metal (Section 4.2.48).
9. Remove the Gear Regi Rubber (Section 4.2.49).
10. Remove the Clutch Regi (Section 4.2.50).
11. Disengage the left E-ring that secures the Roll Regi Metal to the P/H Assy.
12. Unhook the Spring Torsion from the notch of Chute Upper Assy.
13. Move the Spring Torsion to the left from the P/H Assy, avoiding the boss
of Bearing Metal R.
14. Closing the Chute Upper Assy and Chute Inlet, align the boss of Bearing
Metal R with the right slit, and draw the Bearing Metal R from the P/H
Assy.
15. Closing the Chute Upper Assy and Chute Inlet, align the boss of Bearing
Metal with the left slit, and draw the Bearing Metal from the P/H Assy.
16. Draw upward the right shaft of Roll Regi Metal from the right bearing of P/
H Assy.
17. Draw diagonal rightward the Roll Regi Metal together with Chute Upper
Assy and Chute Inlet from the P/H Assy.
18. Remove the Bearing Rubber R that secures the Roll Regi Rubber to the P/
H Assy.
19. Remove the Bearing Rubber L that secures the Roll Regi Rubber to the P/H
Assy.
Disassembly and Assembly
20. Moving the Roll Regi Rubber to the right from the P/H Assy, draw the left
shaft of Roll Regi Rubber from the left bearing bore of P/H Assy.
21. Draw upward the right shaft of Roll Regi Rubber from the bearing of P/H
Assy, and draw diagonal rightward the Roll Regi Rubber from the P/H
Assy.
Disassembly and Assembly
Figure 4-59. Roll Regi Rubber Removal (1)
Revision B
156