EPSON EPL-N2050
4.2.7 Cover Assy Top
4.2.7.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Open the Cover Rear.
4. Remove the Cover Option (Section 4.2.6).
5. Remove the four screws securing the Cover Assy Top to the printer.
6. Raising a little the Cover Assy Top from the printer, unplug the connector
(P/J362) on the back side of Control Assy Panel.
7. Remove the Cover Assy Top from the printer.
8. Remove the Control Assy Panel (Section 4.2.8).
Figure 4-8. Cover Assy Top Removal
Disassembly and Assembly
4.2.7.2 Assembly
NOTE: In the following steps, mount the Cover Assy Top while
paying attention to the sections overlapped with the Cover
Left, Cover Assy I/F, and Cover Right.
1. Mount the Control Assy Panel (Section 4.2.8) on the Cover Assy Top
(Section 4.2.7).
2. Plug the connector (P/J362) on the back side of Control Assy Panel from
the Cover Assy Top.
3. Align the Cover Assy Top with its mount position on the printer.
4. Secure the Cover Assy Top to the printer with four screws.
5. Mount the Cover Option (Section 4.2.6).
6. Close the Cover Rear.
7. Mount the Cover Front L/H (Section 4.2.5).
8. Mount the Cover Assy Front (Section 4.2.3).
Disassembly and Assembly
Revision B
110