Btr Assy - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.53 BTR Assy

4.2.53.1 Removal
n
In the following steps, do not touch the roll surface of BTR
Assy and the Detack Saw of Chute Trans Assy.
n
In removing the BTR Assy from the printer, take care not
to damage the roll of BTR Assy.
NOTE: After removing the BTR Assy, cover it with A3/Ledger size
paper and store it at a safety place.
1. Open the Cover Assy Front from the printer.
2. Push to unlock the left and right latches of BTR Chute Assy that secure the
BTR Assy from the printer.
3. Holding the left and right knobs of BTR Assy, remove the BTR Assy from
the BTR Chute Assy.
4.2.53.2 Assembly
n
In replacing the BTR Assy with a new one, peel off the
stripping paper that protects the roll of BTR Assy before
mounting.
n
In the following steps, do not touch the roll surface of BTR
Assy and the Detack Saw of Chute Trans Assy.
n
In removing the BTR Assy from the printer, take care not
to damage the roll of BTR Assy.
1. Holding the left and right knobs of BTR Assy, engage the left and right
shafts of BTR Assy with the left and right latches of BTR Chute Assy in the
printer.
2. Pushing the left and right latches of BTR Chute Assy, secure the BTR
Assy.
3. Mount the Chute MBF Assy (Section 4.2.30).
4. Mount the Cover Assy Front (Section 4.2.3).
Disassembly and Assembly Disassembly and Assembly
Figure 4-71. BTR Assy Removal
Revision B
167