Switch Assy I/L Rear - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.79 Switch Assy I/L Rear

4.2.79.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Cover Rear (Section 4.2.12).
4. Remove the Cover Assy I/F (Section 4.2.2).
5. Remove the Cover Left (Section 4.2.1).
6. Remove the Cover Assy Top (Section 4.2.7).
7. Remove the Plate Assy Left (Section 4.2.70).
8. Remove the Cover Interlock (Section 4.2.62).
9. Remove the Chute Assy Exit (Section 4.2.64).
10. Unplug the connector (P/J30) from the PWBA MCU.
11. Unclamp the harness of Switch Assy I/L Rear from the printer.
NOTE: In the following steps, do not detach the Switch Assy I/L Rear
and the printer far away because they are connected with the
harness.
12. Remove the two screws securing the Switch Assy I/L Rear to the printer.
13. Detach the harness of Harness Assy OCT-M a little from the printer.
14. Draw the harness of Harness Assy OCT-M from the hole in the printer.
4.2.79.2 Assembly
1. Insert the harness of Switch Assy I/L Rear into the hole in the printer.
2. Align the Switch Assy I/L Rear with its mount position to the printer.
3. Secure the Switch Assy I/L Rear to the printer with two screws.
4. Plug the connector (P/J30) to the PWBA MCU.
5. Clamp the harness of Switch Assy I/L Rear to the printer.
6. Mount the Chute Assy Exit (Section 4.2.64).
Disassembly and Assembly
7. Mount the Cover Interlock (Section 4.2.62).
8. Mount the Plate Assy Left (Section 4.2.70).
9. Mount the Cover Assy Top (Section 4.2.7).
10. Mount the Cover Left (Section 4.2.1).
11. Mount the Cover Assy I/F (Section 4.2.2).
12. Mount the Cover Rear (Section 4.2.12).
13. Mount the Cover Front L/H (Section 4.2.5).
14. Mount the Cover Assy Front (Section 4.2.3).
Figure 4-99. Removal of Switch Assy I/L Rear
Disassembly and Assembly
Revision B
197