Chute Trans Assy - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.54 Chute Trans Assy

4.2.54.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Chute MBF Assy (Section 4.2.30).
4. Remove the Shaft 14 (Section 4.2.51).
5. Remove the Gear 14 (Section 4.2.51).
6. Remove the P/H Assy (Section 4.2.42).
7. Remove the BTR Assy (Section 4.2.53).
8. From the printer, remove the one screw securing the earth of Wire Assy
DTS to the Chute Trans Assy.
9. From the printer, remove the one screw securing the earth of Wire Assy
TR to the Chute Trans Assy.
10. Remove the two screws securing the Chute Trans Assy to the printer.
11. Remove the Chute Trans Assy from the printer.
4.2.54.2 Assembly
1. Align the Chute Trans Assy with its mount position to the printer.
2. Secure the Chute Trans Assy to the printer with two screws.
3. Secure the earth of Wire Assy DTS to the front left hole in the Chute Trans
Assy with one screw.
4. Secure the earth of Wire Assy TR to the front right hole in the Chute Trans
Assy with one screw.
5. Mount the BTR Assy (Section 4.2.53).
6. Mount the P/H Assy (Section 4.2.42).
7. Mount the Gear 14 (Section 4.2.51).
8. Mount the Shaft 14 (Section 4.2.51).
9. Mount the Chute MBF Assy (Section 4.2.30).
Disassembly and Assembly
10. Mount the Cover Front L/H (Section 4.2.5).
11. Mount the Cover Assy Front (Section 4.2.3).
Disassembly and Assembly
Figure 4-72. Chute Trans Assy Removal
Revision B
168