Harness Assy Size M - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.74 Harness Assy Size M

4.2.74.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Cover Assy I/F (Section 4.2.2).
4. Remove the Cover Left (Section 4.2.1).
5. Remove the Plate Assy Left (Section 4.2.70).
6. Remove the Plate Handle (Section 4.2.72).
7. Remove the Housing Size Sensor (Section 4.2.76).
8. Remove the Cover Size Sensor (Section 4.2.75).
9. Unplug the connector (P/J51) of Harness Assy Size M from the PWBA Size
1.
10. Remove the two screws securing the Harness Assy Size M to the Housing
Size Sensor.
11. Draw off the harness of Harness Assy Size M from three holes in the
Housing Size Sensor, and Remove the Harness Assy Size M.
4.2.74.2 Assembly
1. Insert the harness of Harness Assy Size M into three holes in the Housing
Size Sensor.
2. Align the Harness Assy Size M with its mount position to the Housing Size
Sensor.
3. Secure the Harness Assy Size M to the Housing Size Sensor with two
screws.
4. Plug the connector (P/J51) of Harness Assy Size M to the PWBA Size 1.
5. Mount the Cover Size Sensor (Section 4.2.75).
6. Mount the Housing Size Sensor (Section 4.2.76).
7. Mount the Plate Handle (Section 4.2.72).
8. Mount the Plate Assy Left (Section 4.2.70).
Disassembly and Assembly
9. Mount the Cover Left (Section 4.2.1).
10. Mount the Cover Assy I/F (Section 4.2.2).
11. Mount the Cover Front L/H (Section 4.2.5).
12. Mount the Cover Assy Front (Section 4.2.3).
Figure 4-94. Removal of Harness Assy Size M
Disassembly and Assembly
Revision B
192