Shaft 14 And Gear 14 - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.51 Shaft 14 and Gear 14

4.2.51.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Chute MBF Assy (Section 4.2.30).
NOTE: In the following steps, take care not to drop and then damage
the Gear 14.
4. Holding the Gear 14, draw off the Shaft 14 that secures the P/H Assy from
the printer using long-nose pliers.
5. Remove the Gear 14 from the printer.
Figure 4-68. Shaft 14 Removal
Disassembly and Assembly
4.2.51.2 Assembly
1. Align the Gear 14 with its mount position to the printer.
2. Insert the Shaft 14 from the hole in the P/H Assy, and secure the Gear 14
to the printer.
3. Mount the Chute MBF Assy (Section 4.2.30).
4. Mount the Cover Front L/H (Section 4.2.5).
5. Mount the Cover Assy Front (Section 4.2.3).
Disassembly and Assembly
Figure 4-69. Gear 14 Removal
Revision B
165