Feeder Assy - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.24 Feeder Assy

4.2.24.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Chute MBF Assy (Section 4.2.30).
4. Remove the Cover Assy I/F (Section 4.2.2).
5. Remove the Cover Left (Section 4.2.1).
6. Remove the Cover Assy Top (Section 4.2.7).
7. Remove the Cover Right (Section 4.2.9).
8. Remove the Plate Assy Left (Section 4.2.70).
9. Remove the Plate Handle (Section 4.2.72).
10. Remove the PWBA PS (Section 4.2.85).
11. Remove the Paper Feeder (Section 4.2.85).
12. Remove the Clutch Assy Feed (Section 4.2.27).
13. Remove the Sensor Photo: Face Control (Section 4.2.23).
14. Disengage the E-ring that secures the left shaft of Feeder Assy to the
Paper Feeder.
NOTE: In the following steps, place thick paper under the Paper
Feeder to protect the Roll of Roll Assy Turn from damage.
Take care not to drop and lose the Spring Nudger.
15. Reverse the Paper Feeder so that the top surface faces down.
16. Draw the Bearing securing the left shaft of Feeder Assy to the Paper
Feeder.
17. Open the Chute Assy Front from the Paper Feeder.
18. Sliding the Feeder Assy to the right, draw the shaft of Feeder Assy from
the left bearing bore of the Paper Feeder, and remove the Feeder Assy
from the Paper Feeder.
19. Remove the Spring Nudger from the boss of Paper Feeder.
Disassembly and Assembly Disassembly and Assembly
Figure 4-32. Feeder Assy Removal (1)
Figure 4-33. Feeder Assy Removal (2)
Revision B
129