Adjusting The Main Output Video; Changing The Video Output From The Video Output Connectors - Roland VR-3EX Owner's Manual

Adjusting the Main Output Video

You adjust the main output video to match the equipment
receiving output from the VR-3EX.
MEMO
You can output a color bar, useful for adjusting the image
quality of a display. Use [MENU] g <SETUP> g <COLOR BAR
OUTPUT> to set the value to "ON. "
1.
Press the [MENU] button to display the menu screen.
2.
Touch <VIDEO OUTPUT>.
The VIDEO OUTPUT menu is displayed.
3.
Adjusting the Main Output Video.
You can make the settings for the items described below.
Setting item
OUTPUT RESOLUTION
OUTPUT H. POSITION
OUTPUT V. POSITION
OUTPUT H. SIZE
OUTPUT V. SIZE
OUTPUT CONTRAST
OUTPUT BRIGHTNESS
OUTPUT COLOR
OUTPUT COLOR SPACE
OUTPUT DVI-D/HDMI
OUTFADE WHITE LEVEL
OUTFADE BLACK LEVEL
4.
Press the [MENU] button twice to quit the menu screen.
Explanation
This sets the output format.
g
"Setting the Video Output Format" (p. 20)
This adjusts the display position in the
horizontal direction.
This adjusts the display position in the vertical
direction.
This adjusts the size in the horizontal direction.
This adjusts the size in the vertical direction.
This adjusts the contrast.
This adjusts the brightness.
This adjusts the color.
This sets the color space (system for represent-
ing colors in video) of the HDMI and RGB/
COMPONENT output connectors.
This sets the output mode of the HDMI output
connector.
This adjusts the white level during output fade
(p. 26).
This adjusts the black level during output fade
(p. 26).
Changing the Video Output from the
Video Output Connectors
You can switch the video output of the PVW OUT connector, VIDEO
output connector, and USB port between the following two types.
(1) Main output video
(2) Four-way split screen of input video on video channels 1
through 4
1.
Press the [IN/OUT SETUP] button.
The input/output setup screen for video is displayed.
2.
Touch the switch section for the connector you want to
set
(PVW OUT connector, VIDEO output connector, or USB port)
3.
Turn the [VALUE] knob to select the output video.
4.
Press the [IN/OUT SETUP] button to quit the setup screen.
Video Input/Output Settings
.
21