ZyXEL Communications ZyWALL USG 300 User Manual page 249

The following table describes the labels in this screen.
Table 34 Monitor > System Status > Session Monitor
LABEL
View
Refresh
User
Service
Source
Destination
Search
Active
Sessions
Show
User
ZyWALL USG 300 User's Guide
DESCRIPTION
Select how you want the information to be displayed. Choices are:
sessions by users - display all active sessions grouped by user
sessions by services - display all active sessions grouped by service or
protocol
sessions by source IP - display all active sessions grouped by source
IP address
sessions by destination IP - display all active sessions grouped by
destination IP address
all sessions - filter the active sessions by the User, Service, Source
Address, and Destination Address, and display each session
individually (sorted by user).
Click this button to update the information on the screen. The screen
also refreshes automatically when you open and close the screen.
The User, Service, Source Address, and Destination Address fields
display if you view all sessions. Select your desired filter criteria and click
the Search button to filter the list of sessions.
This field displays when View is set to all sessions. Type the user
whose sessions you want to view. It is not possible to type part of the
user name or use wildcards in this field; you must enter the whole user
name.
This field displays when View is set to all sessions. Select the service
or service group whose sessions you want to view. The ZyWALL identifies
the service by comparing the protocol and destination port of each
packet to the protocol and port of each services that is defined. (See
Chapter 42 on page 745
This field displays when View is set to all sessions. Type the source IP
address whose sessions you want to view. You cannot include the source
port.
This field displays when View is set to all sessions. Type the
destination IP address whose sessions you want to view. You cannot
include the destination port.
This button displays when View is set to all sessions. Click this button
to update the information on the screen using the filter criteria in the
User, Service, Source Address, and Destination Address fields.
This is the total number of active sessions that matched the search
criteria.
Select the number of active sessions displayed on each page. You can
use the arrow keys on the right to change pages.
This field displays the user in each active session.
If you are looking at the sessions by users (or all sessions) report,
click + or - to display or hide details about a user's sessions.
for more information about services.)
Chapter 10 Monitor
249