ZyXEL Communications ZyWALL USG 300 User Manual page 180

Chapter 7 Tutorials
Set the Device Role to Master. This example focuses on the connection from the
3
LAN (ge1) to the Internet through the ge2 interface, so select the ge1 and ge2
interfaces and click Activate. Enter a Synchronization Password
("mySyncPassword" in this example) and click Apply.
Figure 147 Configuration > Device HA > Active-Passive Mode: Master ZyWALL
Example
Click the General tab. Turn on device HA and click Apply.
4
Figure 148 Configuration > Device HA > General: Master ZyWALL Example
180
ZyWALL USG 300 User's Guide