Interior; Display; Rear View Camera; Sensors - Mercedes-Benz CL Operator's Manual

Cleaning the mirror turn signals
! Only use cleaning agents or cleaning
cloths that are suitable for plastic lenses.
Unsuitable cleaning agents or cleaning
cloths could scratch or damage the plastic
lenses of the mirror turn signals.
Clean the plastic lenses of the mirror turn
X
signals using a wet sponge and a mild
cleaning agent, e.g. Mercedes-Benz car
shampoo. Cleaning cloths may be used as
well.
Cleaning the sensors
Clean sensors : of the driving systems
X
with water, car shampoo and a soft cloth.
! If you clean the sensors with a power
washer, make sure that you keep a
distance of at least 11.8 in (30 cm) between
the vehicle and the power washer nozzle.
Information about the correct distance is
available from the equipment
manufacturer.
Cleaning the rear view camera
Use clear water and a soft cloth to clean
X
camera lens :.
! Do not clean the camera lens and the area
around the rear view camera with a power
washer.
Cleaning the exhaust pipes
Impurities combined with the effects of road
grit and corrosive environmental factors may
cause flash rust to form on the surface. You
can restore the original shine of the exhaust
tail pipe by cleaning it regularly, especially in
winter and after washing.
! Do not clean the exhaust tail pipes with
alkaline-based cleaning agents, such as
wheel cleaner.
Clean the exhaust tail pipes with a chrome
X
care product tested and approved by
Mercedes-Benz.
Interior care
Cleaning the display
Before cleaning the display, make sure that
X
it is switched off and has cooled down.
Clean the display surface using a
X
commercially-available microfiber cloth
and TFT/LCD display cleaner.
Dry the display surface using a dry
X
microfiber cloth.
Care
431
Z