Mercedes-Benz CL Operator's Manual page 249

Select Upload/Download Data
X
W to confirm.
Select Copy Data to Storage Medium
X
and press W to confirm.
Select the storage medium to which the
X
data should be copied.
Select Start Copying.
X
COMAND checks whether the storage
medium has enough storage capacity. If
there is enough storage capacity, the data
is copied to the storage medium.
If there is not enough storage capacity,
X
remove the storage medium. Make more
storage space available on the storage
medium. Then, try to copy the COMAND
data to the storage medium again.
Remove the storage medium.
X
Transferring data to another system
(vehicle)
Insert/connect the storage medium (SD
X
card or USB stick) with the saved data into/
to the relevant interface.
Select Vehicle in the main function bar by
X
turning cVd the COMAND controller and
press W to confirm.
The "Vehicle" menu appears.
Select System and press W to confirm.
X
Select Upload/Download Data
X
W to confirm.
Select Import Data from Storage
X
Medium and press W to confirm.
Select Start Data
X
A prompt appears, asking whether the
COMAND data should be overwritten.
Press Yes to confirm that the data saved in
X
COMAND should be overwritten.
COMAND imports the data and restarts the
system.
or
Press No to cancel the import process.
X
and press
and press
Import.
Vehicle
247
Z