Mercedes-Benz CL Operator's Manual page 326

Driving systems
324
To activate: activate Adaptive Highbeam
X
Assist ( page 254).
Y
Press button :.
X
The Night View Assist Plus with spotlight
function display appears in the
multifunction display.
Example: display for a slow-moving vehicle
Night View Assist Plus display
:
Pedestrian recognized
;
Framing
=
Example: symbol for active spotlight
?
function
Speed display
A
The active spotlight function symbol ?
changes according to the vehicle's speed and
surroundings.
Symbols for the active spotlight function
Symbol for stationary vehicle and when
:
driving on well-lit roads
Symbol at speeds above approximately
;
6 mph (10 km/h)
Symbol at speeds above approximately
=
28 mph (45 km/h)
You can find out more about adjusting the
brightness of the multifunction display in the
"COMAND" section (
Y
i
The spotlight function only switches on
when you are driving at speeds of at least
28 mph (45 km/h). Therefore, when the
vehicle is stationary or moving slowly, you
cannot check whether Night View Assist
Plus with spotlight function is operating.
When you activate Night View Assist Plus with
spotlight function, speed display A in the
multifunction display changes. Speed display
A is shown as a bar at the bottom edge of
the multifunction display. This line is no
longer available for basic menus. You have to
deactivate Night View Assist Plus with
spotlight function in order to change a setting
using the buttons on the multifunction
steering wheel.
To deactivate the spotlight function
X
briefly: move the combination switch back
to its normal position.
The spotlight function and Adaptive
Highbeam Assist are deactivated.
page 118).