Releasing - Mercedes-Benz CL Operator's Manual

Cl class
Hide thumbs Also See for CL:
Table of Contents

Advertisement

Occupant safety
58
Adjust the seat and move the backrest to
X
an almost vertical position (
Pull the seat belt smoothly through belt
X
sash guide :.
Without twisting it, guide the shoulder
X
section of the seat belt across the middle
of your shoulder and the lap section across
your hips.
Engage belt tongue ; in buckle =.
X
If necessary, pull upwards on the shoulder
X
section of the seat belt to tighten the belt
across your body.
All seat belts except the driver's seat belt are
equipped with a special seat belt retractor to
securely fasten child restraint systems in the
vehicle. For further information about special
seat belt retractors, see (
For more information about releasing the seat
belt with release button ?, see "Releasing
seat belts" (
page 58).
Y
Releasing seat belts
Press release button ?(
X
guide belt tongue ; back towards belt
sash guide :.
! Make sure that the seat belt is fully rolled
up. Otherwise, the seat belt or belt tongue
will be trapped in the door or in the seat
mechanism. This could damage the door,
the door trim panel and the seat belt.
Damaged seat belts can no longer fulfill
their protective function and must be
replaced. Visit a qualified specialist
workshop.
Belt warning for the driver and front
passenger
Regardless of whether the driver's and front-
passenger seat belts have already been
fastened, the 7 seat belt warning lamp will
light up for six seconds each time the engine
is started. It then goes out if the driver and
the front passenger have fastened their seat
belts.
page 96).
Y
page 61).
Y
page 57) and
Y
If the driver's seat belt is not fastened when
the engine is started, an additional warning
tone will sound. The warning tone goes out
after approximately six seconds or once the
driver's seat belt is fastened.
If after six seconds the driver's or front-
passenger seat belt is not fastened and the
doors are closed, the 7 seat belt warning
lamp will remain lit:
until the driver's or front passenger's seat
R
belt is fastened
once the vehicle has exceeded a speed of
R
15 mph (25 km/h), in addition a warning
tone will sound with increasing intensity for
up to 60 seconds or until the driver's or
front-passenger seat belt is fastened.
If the driver or front passenger unfastens their
seat belt during the journey, the 7 seat
belt warning lamp lights up and the warning
tone sounds again.
The warning tone ceases after 60 seconds
even if the driver or front passenger has still
not fastened their seat belt. The 7 seat
belt warning lamp stops flashing, but remains
lit.
After the vehicle has come to a stop, the
warning tone will be reactivated and the
7 seat belt warning lamp will flash again
once the vehicle has exceeded a speed of
15 mph (25 km/h).
The 7 seat belt warning lamp will not go
out until:
both the driver and the front passenger
R
have fastened their seat belts.
or
the vehicle is stationary and a door is open.
R
i
For more information on the 7 seat
belt warning lamp, see "Warning and
indicator lamps in the instrument cluster,
seat belt" (
page 389).
Y

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl 550 4maticCl 600Cl 63 amgCl 65 amg

Table of Contents