Mercedes-Benz CL Operator's Manual page 244

Vehicle
242
cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
To switch on: select Æ and press W.
X
To switch off: select Æ and press W.
X
A tick appears.
Controlling climate control centrally
You can use the
air-conditioning zones in the vehicle to the
same settings. If the
switched on and you adjust climate control
on the driver's side, these changes will also
be made in all the air-conditioning zones.
Select the climate control main menu in the
X
air-conditioning function bar by turning
cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
Select Mono and press W.
X
A tick appears when the function is
selected.
The Mono function is automatically switched
off if you:
change settings for automatic climate
R
control on the front-passenger side using
COMAND
press one of the rocker switches to operate
R
automatic climate control on the front-
passenger side
Mono function to set all the
Mono function is
Adjusting the footwell temperature
You can use the Footwell Temperature
function to set the temperature difference
between the footwell and the rest of the
vehicle interior.
i
This setting is quite effective in automatic
mode, especially at low outside
temperatures.
The greater the value you set, the higher the
temperature in the footwell.
Select the climate control main menu in the
X
air-conditioning function bar by turning
cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
Select Footwell Temperature
X
W.
A scale appears.
To change the temperature difference:
X
slide ZVÆ or turn cVd.
To confirm your selection: press W.
X
Setting the blower settings for the air
vents
This function allows you to determine the way
the air is blown through the air vents in
automatic mode.
You can select:
Focused (high blower setting)
R
Medium (standard setting)
R
Diffuse (low blower setting)
R
and press