Trunk Lid Opening Height Restriction; Comand - Mercedes-Benz CL Operator's Manual

To switch the locator lighting on/off:
X
select Vehicle in the main function bar by
sliding XVY and turning cVd the
COMAND controller and press W to
confirm.
The main area is active.
Select the Locator Lighting
X
sliding XVY or turning cVd the COMAND
controller and press W to confirm.
Switching the automatic locking
feature on/off
You can use this function to activate or
deactivate the automatic central locking
feature. If the automatic locking feature is
activated, your vehicle will lock centrally from
a speed of approximately 15 km/h.
Further information about the automatic
locking feature is available in the "Automatic
locking feature" section .
To switch the automatic locking
X
feature on/off: select
main function bar by sliding XVY and
function by
Vehicle in the
turning cVd the COMAND controller and
press W to confirm.
The main area is active.
Select the Automatic Locking
X
by sliding XVY or turning cVd the
COMAND controller and press W to
confirm.
Activating/deactivating the trunk lid
opening height restriction
To activate/deactivate the trunk lid
X
opening height restriction: select
Vehicle in the main function bar by sliding
XVY and turning cVd the COMAND
controller and press W to confirm.
The main area is active.
Select the Trunk Opening-height
X
Restriction function by sliding XVY or
turning cVd the COMAND controller and
press W to confirm.
Automatic climate control
Introduction to automatic climate
control
You can operate automatic climate control
using COMAND or the buttons on the upper
section of the center console (
Several special automatic climate control
functions can only be adjusted using

COMAND.

You can access the automatic climate control
menu via the air-conditioning function bar.
Vehicle
239
function
page 263).
Y
Z