Front - Mercedes-Benz CL Operator's Manual

i
This setting is quite effective in automatic
mode, especially at high outside
temperatures.
If the vehicle has become very warm and the
automatic air conditioning is cooling the
interior, the blower settings are briefly
canceled.
Select the climate control main menu in the
X
air-conditioning function bar by turning
cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
Select Airflow and press W.
X
A menu appears.
The current setting is indicated by a # dot.
To change the airflow: slide ZVÆ or turn
X
cVd.
To confirm your selection: press W.
X
Seats
Lumbar supports
The lumbar support in the backrest of the
driver's and front-passenger seats can be
adjusted to provide optimum support for your
back.
To select the seat: press the T
X
function button.
The main area of the COMAND display is
active. A scale appears.
To move to the lower menu bar: select
X
by sliding ZVÆ the COMAND controller
and press W to confirm.
i
When you press the T function button,
the previously adjusted seat is active.
To adjust the lumbar support: select by
X
sliding XVY or turning cVd the COMAND
controller and press W to confirm.
Multicontour seat
i
Information about the components and
operating principles of COMAND can be
found on ( page 112).
Y
The contour of the driver's seat and front-
passenger seat backrests can be individually
adjusted to provide optimum support for your
back. This is achieved by controlling the
pressure in the air chambers in the
multicontour seat.
The adjustments are made using the
COMAND display.
i
When you adjust the multicontour seat,
you may hear the air being pumped in or
released.
You can adjust the following air cushions:
seat side bolsters
R
seat backrest side bolsters
R
backrest curvature in the lumbar region
R
backrest curvature in the upper back
R
region
Vehicle
243
Z