Basic Functions - Mercedes-Benz CL Operator's Manual

At a glance
126
Option 1
Select 4 or 5 in the character bar and
X
press W to confirm.
The input menu shows the data field
selected.
Cursor in the next data field
:
To store an entry
;
4 and 5 icons to select a data field
=
Option 2
Slide ZV the COMAND controller
X
repeatedly until the character bar
disappears.
Select the data field by sliding ZVÆ and
X
press W to confirm.
Storing an entry
Select ¬ in the character bar by turning
X
cVd the COMAND controller and press
W to confirm.
The entry is stored in the address book.
Further functions available in the
character bar
To switch the character bar to upper/
X
lower-case characters: select * or
E and press W to confirm.
To switch the character set: select
X
p and press W to confirm.
The character set switches between
upper/lower-case letters and digits.
To change the language of the
X
character bar: select B and press W
to confirm.
Select the language by turning cVd the
X
COMAND controller and press W to
confirm.
To reposition the cursor within the data
X
field: select 2 or 3 and press W to
confirm.
Cursor (repositioned)
:
2 and 3 icon to reposition the cursor
;
Delete the character/entry (
X
Basic functions of COMAND
Switching COMAND on/off
Press the u function button on the
X
center console.
i
If you switch off COMAND, playback of
the current audio or video source will also
be switched off. You cannot switch off
COMAND while making a call via COMAND.
You can also make phone calls using the
buttons on the multifunction steering
wheel when COMAND is switched off
( page 337).
Y
page 195).
Y