Mercedes-Benz CL Operator's Manual page 247

Adjusting the backrest curvature in the
lumbar region
This function allows you to adjust the air
cushions in the lumbar region of the backrest.
Select the seat ( page 244).
X
Y
Select Lumbar by sliding XVY or turning
X
cVd the COMAND controller and press
W to confirm.
A crosshair appears. You can make two
settings:
Vertical: to move the point of greatest
R
lumbar support up or down
Horizontal: to adjust the amount of
R
support
Select Setting by sliding ZVÆ or turning
X
cVd the COMAND controller and press
W to confirm.
Adjusting the backrest curvature in the
upper back region
This function allows you to adjust the air
cushions in the upper back region of the
backrest.
Select the seat ( page 244).
X
Y
Select Shoulders
X
turning cVd the COMAND controller and
press W to confirm.
A scale appears.
by sliding XVY or
Select Setting by sliding ZVÆ or turning
X
cVd the COMAND controller and press
W to confirm.
Resetting adjustments
You can reset the seat settings to the factory
settings.
Select the seat ( page 244).
X
Y
Select Reset All
X
turning cVd the COMAND controller and
press W to confirm.
Active multicontour seat
The dynamic function of the active
multicontour seat automatically adapts the
side bolsters of the backrest to your current
driving style.
Select the seat ( page 244).
X
Y
Select Dynamic Seat
X
turning cVd the COMAND controller and
press W to confirm.
To confirm your selection: press W.
X
A scale appears.
You can select:
0: Off
R
1: Level 1
R
2: Level 2
R
Vehicle
by sliding XVY or
by sliding XVY or
Z
245