Activating/Deactivating; In The Instrument Cluster - Mercedes-Benz CL Operator's Manual

Menus and submenus
348
Deactivating/activating ESP
G
WARNING
Under no circumstances should you
deactivate ESP
warning lamp in the instrument cluster
flashes. Proceed as follows:
when driving off, apply as little throttle as
R
possible.
while driving, ease up on the accelerator
R
pedal.
adapt your speed to suit the prevailing road
R
and weather conditions.
Failure to observe these guidelines could
cause the vehicle to skid. ESP
prevent accidents resulting from excessive
speed.
For further information about ESP
( page 67).
Y
Start the engine.
X
Press = or ; on the steering wheel
X
to select the
Press the 9 or : button to select
X
ESP.
Press the a button.
X
To deactivate: press a again.
X
The å warning lamp in the instrument
cluster comes on.
G WARNING
When the å ESP
®
ESP is deactivated.
If the ÷ ESP
®
å ESP OFF warning lamp remain lit,
®
ESP is not available due to a malfunction.
®
When ESP is deactivated or not operational,
vehicle stability in standard driving
maneuvers is reduced.
Adapt your speed and driving to the prevailing
road conditions and to the non-operating
status of the ESP
®
® ®
when the ÷ ESP
®
cannot
®
, see
Assistance menu.
®
OFF warning lamp is lit,
®
warning lamp and the
®
.
To activate: press a again.
X
The å warning lamp in the instrument
cluster goes out.
Activating/deactivating PRE-SAFE
Brake
®
PRE-SAFE Brake is only available in vehicles
with DISTRONIC PLUS.
Press the = or ; button on the
X
steering wheel to select the
menu.
Press 9 or : to select
X
Brake.
Press a.
X
The current selection is displayed.
To activate/deactivate: press a
X
again.
®
When PRE-SAFE Brake (
activated, the multifunction display shows
the Ä symbol as long as the HOLD
function is not activated (
Activating/deactivating ATTENTION
ASSIST
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the 9 or : button to select
X
Attention Assist.
Press a.
X
The current selection is displayed.
To activate/deactivate: press a
X
again.
When ATTENTION ASSIST (
activated, the À symbol appears in the
multifunction display when the ignition is on.
Activating/deactivating Active Blind
Spot Assist
You can use the Blind Spot Assist
function to activate or deactivate Active Blind
Spot Assist ( page 327).
Y
®
DriveAssist
PRE-SAFE
page 68) is
Y
page 308).
Y
DriveAssist
page 321) is
Y