Mercedes-Benz CL Operator's Manual page 453

Remove any existing moisture from the
X
fuse box using a dry cloth.
AMG vehicles: remove the control unit
X
above the fuse box.
To open: undo screws : with an Allen
X
key.
Remove bracket =.
X
Remove cover ;.
X
To close: check whether the rubber seal is
X
lying correctly in cover ;.
Put cover ; back in position.
X
Replace bracket =.
X
Tighten screws : using an Allen key.
X
! The cover must be seated properly,
otherwise moisture or dirt could impair the
function of the fuses.
Close the hood ( page 421).
X
Y
Fuse box on the right in the direction of
travel
Open the hood ( page 420).
X
Y
Remove any existing moisture from the
X
fuse box using a dry cloth.
To open: open clamps ;.
X
Remove cover ; upwards.
X
To close: check whether the rubber seal is
X
lying correctly in cover ;.
Put cover ; back in position.
X
Fold down cover : and close clamps ;.
X
! The cover must be seated properly,
otherwise moisture or dirt could impair the
function of the fuses.
Close the hood ( page 421).
X
Y
Engine emergency off
If the engine cannot be switched off as
described, observe the following procedure:
Take the fuse allocation chart out of the
X
vehicle document wallet.
Search for "Emergency engine shutdown"
X
in the fuse allocation chart.
Remove the fuses listed under "Emergency
X
engine shutdown".
Fuses
451
Z