Alternative Route; Selecting An Alternative Route - Mercedes-Benz CL Operator's Manual

Avoiding a section of the route blocked
by a traffic jam
This function blocks a section of the route
ahead of you. You can set the length of the
blocked route section. If possible, COMAND
calculates a detour around the blocked
section of the route.
To activate navigation mode: press the
X
S function button once or twice.
To show the menu: press W the COMAND
X
controller.
Select Route in the navigation system
X
menu bar by turning cVd the COMAND
controller and press W to confirm.
Select Detour and press W to confirm.
X
To block a section of the route: select
X
More or Less repeatedly and confirm using
W until the desired section has been
selected.
i
The total length of the section that can be
blocked is defined by the digital map. The
menu items are available accordingly.
To start route calculation: select
X
and press W to confirm.
To delete the blocked section: select
X
Delete while the message is shown and
press W to confirm.
COMAND calculates the route without the
block.

Selecting an alternative route

With the "Alternative route" function, routes
other than the original one can be calculated.
To activate navigation mode: press the
X
S function button once or twice.
To show the menu: press W the COMAND
X
controller.
Select Route in the navigation system
X
menu bar by turning cVd the COMAND
controller and press W to confirm.
Select

Alternative Route

X
to confirm.
You see the selected route. The display now
shows a split-screen view. On the left-hand
side, one or more alternative routes are
shown from start to destination. The
current route is highlighted dark blue; other
alternative routes appear light blue.
Distance, expected arrival time and
:
expected journey duration
Displays incidents which are on the route
;
Displays the selected route settings
=
To select the next or previous
X
alternative route: select
Start
Previous
Possible alternative routes are shown in the
following order:
Route, Eco
Alternative
To select the original route: select
X
a corresponding number of times and press
W to confirm.
To start route guidance using the
X
selected alternative route: select
and press W to confirm.
COMAND accepts the alternative route.
i
The change of route mode in the
alternative route menu only applies to the
current route guidance. For example, if the
original route was a short route, the next
route will also be calculated as a short
route. This is also the case if a dynamic
route is selected in the alternative route
menu.
Navigation
and press W
Next
and press W to confirm.
Current Route,
Route, Short Route
Route.
159
or
Fast
and
Back
Start
Z