Arrival Time/Distance To The Destination; Information In The Display; Point Of Interest Symbols; Road Display - Mercedes-Benz CL Operator's Manual

Select Navi in the main function bar by
X
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
Select POI Symbols on Map
X
W to confirm.
Select Standard Symbols,
X
Symbols or No Symbols.
If you select Personal
points of interest appears.
To switch the icon display on/off: select
X
a point of interest by turning cVd the
COMAND controller and press W to
confirm.
Depending on the previous state of the
symbols, they will either be shown O or
hidden ª. You can switch on the symbol
displays for more than one point of interest.
i
The list shows all symbols that are
contained on the digital map across all
countries. However, not all points of
interest are available in all countries. As a
result, certain point of interest symbols
may not be displayed on the map, even if
the symbol display is switched on.
To exit the menu: press the % back
X
button.
Map information in the display
Showing text information
During route guidance, you can have map
information displayed at the bottom edge of
the display.
To show the menu: press W the COMAND
X
controller.
Select Navi in the main function bar by
X
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
The main area is active.
Select Navi again and press W to confirm.
X
The navigation menu opens.
and press
Personal
Symbols, the list of
Select Text Information on Map
X
press W to confirm.
A # dot indicates the current setting.
Select Arrival Time/Distance,
X
Current Street,
None and press W to confirm.
To exit the menu: slide XVY the COMAND
X
controller.

Arrival time/distance to the destination

Arrival time/distance display switched on
Icon for destination
:
Distance to the destination
;
Icon for estimated time of arrival
=
Estimated time of arrival
?
You can only see this display during route
guidance. While scrolling the map
( page 171), you will see additional data, e.g.
Y
road names, depending on the crosshair
position, if the digital map supports this data.

Road display

Road display active
Road names or numbers, e.g. for
:
highways
Navigation
and
Geo-Coordinates or
Z
173