Mercedes-Benz CL Operator's Manual page 71

you will be warned visually and acoustically
as well as by automatic braking. PRE-SAFE
Brake cannot prevent a collision without your
intervention.
Starting at a speed of around 4 mph
(7 km/h), this function warns you if you
rapidly approach a vehicle in front. An
intermittent warning tone will then sound and
the · distance warning lamp will light up
in the instrument cluster.
Brake immediately in order to increase the
X
distance from the vehicle in front.
or
Take evasive action provided it is safe to do
X
so.
From a speed of approximately 4 mph
(7 km/h), if the driver and front passenger
have fastened their seat belts, PRE-SAFE
Brake can brake the vehicle automatically at
speeds up to approximately 124 mph
(200 km/h).
Due to the nature of the system, particularly
complicated driving conditions may cause
unnecessary warnings or the unnecessary
intervention of PRE-SAFE
You can prevent the intervention of the PRE-
®
SAFE Brake at any time by:
depressing the accelerator pedal further.
R
activating kickdown.
R
releasing the brake pedal.
R
The braking action of PRE-SAFE
ended automatically if:
you maneuver to avoid the obstacle.
R
there is no longer any danger of a rear-end
R
collision.
there is no longer an obstacle detected in
R
front of your vehicle.
With the help of the radar sensor system,
®
PRE-SAFE Brake can detect obstacles that
are in front of your vehicle for an extended
period of time.
At speeds up to approximately
40 mph (70 km/h), PRE-SAFE
®
®
®
Brake.
®
Brake is
®
Brake can
Driving safety systems
also detect stationary obstacles such as
stopped or parked vehicles.
If you approach an obstacle and PRE-SAFE
Brake detects a risk of collision, the system
will initially alert you both visually and
acoustically. If you do not brake or take
evasive action, the system will warn you by
automatically braking the vehicle gently. If
there is an increased risk of collision,
preventative passenger protection measures
®
(PRE-SAFE ) are activated (
risk of collision remains at speeds of over
20 mph (30 km/h) and you do not brake, take
evasive action or significantly accelerate,
automatic emergency braking may be
performed up to and including full brake
application. Automatic emergency braking is
not performed until immediately prior to an
accident that can no longer be avoided.
G
WARNING
®
PRE-SAFE Brake will initially brake your
vehicle by a partial application of the brakes
if a danger of collision is detected. There may
be a collision unless you also brake.
Automatic emergency braking cannot prevent
a collision. There is a risk of an accident.
Always apply the brakes yourself and try to
take evasive action.
G
WARNING
®
PRE-SAFE Brake cannot always clearly
identify objects and complex traffic
conditions.
In these cases, PRE-SAFE
give an unnecessary warning and then
R
brake the vehicle
not give a warning or intervene
R
There is a risk of an accident.
Always pay particular attention to the traffic
situation and be ready to brake, especially if
®
PRE-SAFE Brake warns you. Terminate the
intervention in a non-critical driving situation.
®
page 55). If a
Y
®
Brake may:
Z
69