Fitting The Licence Plate Onto The Front Licence Plate Bracket - Mercedes-Benz EQB 2023 Owner's Manual

Table of Contents

Advertisement

General notes
70
The components of the high-voltage onboard elec-
trical system are marked with yellow warning
stickers. The cables of the high-voltage onboard
electrical system are orange.
High-voltage components that can become very
hot are marked with a separate warning sticker:
Example
Vehicles with an electric motor generate signifi-
cantly less vehicle noise emissions than vehicles
with combustion engines.
This means that other road users may fail to hear
the vehicle owing to its significantly lower driving
noise.
It is for this reason that the vehicle is equipped
with a sound generator, which serves as an acous-
tic vehicle alerting system (AVAS). This protective
measure is prescribed by law.
This exterior noise by the sound generator (AVAS)
is audible in the vehicle interior at low speeds,
and is not a malfunction.
F243 0059 02
Fitting the licence plate onto the front licence
plate bracket
* NOTE Malfunctions and system failures
due to incorrect assembly of the licence
plate on the front licence plate holder
If the licence plate is incorrectly assembled on
the front licence plate holder, sensors, cam-
eras or driving and safety systems may mal-
function or fail.
Observe the following points when assembling
the licence plate on the front licence plate
holder:
Assemble the licence plate directly on
#
the licence plate holder without advertis-
ing media or other holders.
Assemble the licence plate so that it
#
does not protrude above or to the side of
the licence plate adapter.

Advertisement

Table of Contents
loading

Table of Contents