Preset Record Configuration; Per Camera Configuration - Speco 4TL User Manual

3.5.2

Preset Record Configuration

The <Preset Config> is used to select the preset recording quality and frame
rate. In normal circumstances, it is strongly recommended to set the preset
configuration as <Best Quality>. Below table shows the PPS and picture size
under <Best Quality> in Half-D1 mode for DVR-16TL. Please refer to the
section
Configuration for more detailed information.
Half-D1 mode (NTSC: 720x240@120PPS; PAL: 720x288@100PPS)
Normal PPS
7.5 NTSC
(6.25 PAL)
3.5.3

Per Camera Configuration

This function is used to set the Day / Night / Weekend PPS (Picture per
Second) and Quality for each channel. The Preset Configuration must be set
to <OFF> for accessing these schedules. The menu is displayed as below
(Record Mode: 720×240@120PPS in NTSC / 720×288@100PPS in PAL for
DVR-16TL).
• First, select a Camera for setting its record configuration. The image and
recording settings from the selected camera will be displayed on the
screen.
• Move the cursor using Direction keys and press ENTER to select an item.
• Change the value using UP / DOWN keys.
• Press ENTER to confirm the settings or ESC to abort.
• Press ESC to return to Record Setup menu.
Preset Record
Normal Size
10 KB / PIC
Cameral Select
Normal PPS
Normal Size
Event Max PPS
Event Size
Event Active
Configuration under
Event PPS
30 NTSC
(25 PAL)
Per Camera Config
Day Night
7.5
Mid
30
Best
Both
TL H.264
DVR User's
Advanced
Event Size
10 KB / PIC
CH01
Weekend
7.5 7.5
Mid
Mid
30 30
Best Best
Both Both
Manual
System
25