Projector Id/Remote Control Id; Registering An Id Number For A Projector - Epson EMP-835 User Manual

Functions for Enhancing Projection
HDTV g
For
When 16:9 format images in squeeze mode are projected at 4:3 aspect
ratio, the images are resized so that they fill the full vertical area of the
screen, and the left and right edges are truncated and are not displayed.
When images in squeeze
mode are projected at 16:9
TIP
When projecting images with an aspect ratio of 16:9, the image
position will change as follows each time you press the [Resize] button
while holding down the [Shift] button on the projector's control panel.
Centre display
Bottom edge display
When images in squeeze
mode are projected at 4:3
Top edge display

Projector ID/Remote Control ID

If using more than one projector at a time, such as at a show, you can
record ID numbers for the projectors and for the remote controls in order to
simultaneously operate projectors with the same ID number. Alternatively,
if you set the remote control ID to "0", all projectors can be operated by the
remote control regardless of the projector ID numbers.
TIP
The default values for ID numbers are "1" for projectors and "0" for
remote controls.

Registering an ID Number for a Projector

PROCEDURE
Press the [Menu] button and then select the
1
"Extended" - "Projector ID" configuration menu.
s"Using the Configuration Menus" for details on this
operation. p.87
Remote control
User's Guide
64
Projector