Projector Id/Remote Control Id; Registering An Id Number For A Projector - Epson EMP-7850 User Manual

Functions for Enhancing Projection Functions for Enhancing Projection

Projector ID/Remote Control ID

If using more than one projector at a time, such as at a show, you can
record ID numbers for the projectors and for the remote controls in order to
simultaneously operate projectors with the same ID number. Alternatively,
if you set the remote control ID to "0", all projectors can be operated by the
remote control regardless of the projector ID numbers.
TIP
The default values for ID numbers are "1" for projectors and "0" for
remote controls.

Registering an ID Number for a Projector

PROCEDURE
Press the [Menu] button on either the remote control
1
or the projector's control panel, and then select
"Projector ID" from the "Advanced2" menu.
See "Using the Configuration Menus" for details on this operation.
p.92
Remote control
Use the [ ] button on the remote control or the [ ] or
2
[ ] button on the projector's control panel to select
the desired ID number (1–9).
Press the [Enter] button on the remote control or the [Auto/
Enter] button on the projector's control panel to accept the ID
number setting.
Video Video
Br Brightness Control ightness Control
Audio udio
Projector ID Projector ID
Eff Effect ect Networ ork Netw
Setting Setting
COM Por ort COM P
User's Logo User's Logo
Auto setup uto setup
Advanced1 Adv anced1
BNC Sync BNC Sync Ter ermination
Advanced2 Adv anced2 Reset Reset
About About
Reset All Reset All
[ ESC ]: Return [ / ]: Select [
TIP
The numbers that can be used for the "Projector ID" setting are from
"1" to "9". "Projector ID" cannot be set to "0".
Once the setting has been made, press the [Menu]
3
button to close the configuration menu.
When the ID number is registered, the projector cannot be
operated by remote control unless the remote control used has
the same ID number or has an ID number of "0".
EMP-7850 User's Guide
:
High High Low Lo
: 6
Set Set
Set Set
: RS-232C RS-232C USB USB
: :
ON ON OFF OFF
:
mination ON ON OFF OFF
Execute Ex ecute
]: Set [Menu]: [Men u]: Exit Exit
73