Projector Id/Remote Control Id; Registering An Id Number For A Projector - Epson EMP-7950 User Manual

Functions for Enhancing Projection

Projector ID/Remote Control ID

If using more than one projector at a time, such as at a show, you can
record ID numbers for the projectors and for the remote controls in order to
simultaneously operate projectors with the same ID number. Alternatively,
if you set the remote control ID to "0", all projectors can be operated by the
remote control regardless of the projector ID numbers.
TIP
The default values for ID numbers are "1" for projectors and "0" for
remote controls.

Registering an ID Number for a Projector

PROCEDURE
Press the [Menu] button on either the remote control
1
or the projector's control panel, and then select
"Projector ID" from the "Advanced2" menu.
See "Using the Configuration Menus" for details on this operation.
p.96
Remote control
Video
Brightness Control
Audio
Projector ID
Effect Network
Setting
COM Port
User's Logo
Auto Setup
Advanced1
BNC Sync Termination
Advanced2 Direct Power ON
About Operation Lock
Reset All
Reset
[ ESC ]: Return [ / ]: Select [
TIP
The numbers that can be used for the "Projector ID" setting are from
"1" to "9". "Projector ID" cannot be set to "0".
User's Guide
:
High Low
: 1
Set
Set
:
RS-232C USB
:
ON OFF
:
ON OFF
:
ON OFF
:
ON OFF
Execute
[Menu]: Exit
]: Set
74