Epson EMP-835 User Manual page 86

List of Configuration Menu Commands
Operation
Direct Power ON
Sleep Mode
Network
Standby Mode
Network ON,
COM Port
Language
Italiano, Español,Português,
(Varies depending on country of purchase)
Reset
Sets whether direct power on is enabled ("ON") or disabled ("OFF").
ON, OFF
When you set to "ON" and leave the power cable connecting to a wall socket, be aware
of the sudden surges of electricity when the power comes back on after the power outage
or something, that cause the projector turn on automatically.
Sets whether projection stops automatically ("ON") or not ("OFF") when no operations
ON , OFF
are carried out for approximately 30 minutes while no image signals are being input.
Configure network connection. (EMP-830 only)
For details about settings
If using the EMP-835, network settings are made using EasyMP. sEasyMP Network Setup Guide
If set to "Network ON", the network monitoring and control functions can be used even when the
projector is in standby mode. If you change the setting, the new setting will be enabled after the
Network OFF
power is turned off.
Sets whether the [RS-232C] or [USB] port is to be used for communicating with a computer. If you
RS-232C , USB
change the setting, the new setting will be enabled after the power is turned off.
, Français, Deutsch,
English
,
,
Returns all adjustment values in the "Extended" menu except for the "Projector ID", "Projection",
"Standby Mode", "COM Port" and "Language" settings to their default values. If you would like to
return all menu items to their default, s"All Reset"
sp.90
Sets the language to be used for menu and message displays.
If using the EMP-835, this setting is also applied to EasyMP.
Default setting values
sp.33
p.86
User's Guide
85