Functions for Enhancing Projection
TIP
• The type of display for projected images can be saved separately for
each input source.
• If the input resolution is the same as the panel resolution
(1024× 768 dots), the image size will not change.
• In the case of SXGA (5:4) input signals, the image position changes
as shown below each time you press the [Resize] button while
holding down the [Shift] button on the projector's control panel.
Resized display (5:4)
Resized display (4:3)
Aligned to left (5:4)
Aligned to right (5:4)
Projecting Wide-screen Images from Video Equipment
aspect ratio g
You can switch the
video g (YCbCr g
YPbPr g
and
),
are being projected.
Images that have been recorded in digital video and DVD images can be
projected in 16:9 wide-screen format.
PROCEDURE
The display switches each time you press the [Resize]
button.
Remote control
SDTV g
For
When 16:9 format images in squeeze mode are projected at 4:3 aspect
ratio, the images are squeezed horizontally and appear vertically elongated.
When images in squeeze
g
mode
are projected at 4:3
User's Guide
between 4:3 and 16:9 when
component
S-Video g
composite video g
and
Projector
When images in squeeze
mode are projected at 16:9
63
signals