Installation; Setting Up The Projector - Epson EMP-835 User Manual

Installation

Setting Up the Projector

The projector supports the following four different projection methods,
allowing you to choose the best method for displaying your images.
Caution
• Before setting up the projector, be sure to first read the separate
Safety Instructions/World-Wide Warranty Terms.
• Do not set this projector up on its side to carry out projection,
otherwise malfunctions may occur.
• Front projection
• Rear projection using a translucent screen
• Front/ceiling projection
• Rear/ceiling projection using a translucent screen
* A special method of installation is required for suspending the projector
from the ceiling. Please contact your supplier if you would like to use
this installation method. The optional ceiling mount is required when
installing the projector on the ceiling. s
TIP
When the projector is suspended from a ceiling or projecting from
behind the screen, change the "Extended" - "Projection" setting to
sp.84
the appropriate setting.
User's Guide
14
p.128