Functions For Enhancing Projection; Selecting An Image Source While Viewing Projected Images (Preview Function) - Epson EMP-835 User Manual

Functions for Enhancing Projection

This section describes the various useful functions that can be used to enhance
presentations.
Selecting an Image Source While Viewing Projected
Images (Preview Function)
You can momentarily project images from the currently-selected input
source, and switch images while viewing them in a preview screen.
Use the remote control to carry out all preview function operations.
PROCEDURE
Press the [Preview] button on the remote control.
1
After a short while, a preview screen such as the one shown in
the illustration below will appear on the screen.
When the preview screen is being displayed, the frames for
ports that have no image signal being input or which have a
signal being input that is not supported will be solid blue.
Once you select an input source by pressing any of the Search
buttons on the remote control, the preview function is
terminated and the selected image is projected.
Active window
Shows the images that are currently being projected.
Computer (Analog-RGB)
Move the
red box
Computer Computer
to the
target
image.
Images from the Images from the
[Computer1/ [Computer2/
Component] port Component] port
Tilt the [ ] button to select the images to be
2
projected.
Move the red box until the desired image is selected.
Computer (Analog-RGB)
Move the
red box
to the
Computer Computer
target
image.
User's Guide
If using EMP-835, a
image of EasyMP will
appear
Easy MP Images from the [Video]
port
* A blue screen will
S-Video Video
appear when no
signals are being input.
Images from the
[S-Video] port
Easy MP
S-Video Video
52