Epson EMP-835 User Manual page 74

Adjusting Projected Images Manually
Press the [ ], [ ], [ ] and [ ] buttons on the remote
3
control to correct the angle position.
You can also tilt the [ ] button on the remote control to correct
the angle position.
• If the vertical or horizontal keystone correction gauge appears when
[
selected.
When carrying out Quick Corner, select "Quick Corner" in the
"Setting" - "Keystone" configuration menu first.
• If you press down the [Esc] button on the remote control or the
projector's control panel for one second while the Quick Corner
correction screen is displayed, the correction results will be restored
to their default values.
Screen
• If the message "Cannot move anymore." appears on the screen
while using the Quick Corner function, it means that the limit for
correction has been reached. Check the following two points.
· Is the projection distance appropriate for the size of the target
· Is the projector tilted past its maximum limit?
• If the input signal is interrupted or an image signal that is not
supported is input while using the Quick Corner function, the
correction value at that point will be recorded and the Quick Corner
function will be cancelled.
• When the Quick Corner correction screen is displayed, the following
functions will be cancelled.
· E-Zoom function · Real display · Freeze
TIP
], [ ], [ ] or [ ], is pressed, it means that "H/V-Keystone" is
sp.70
sp.15
projection screen?
When the adjustment is complete, press the [Menu]
4
button on either the remote control or the projector's
control panel to close the configuration menu.
User's Guide
73
sp.82
sp.68