Turning The Projector On; Connecting The Power Cable - Epson EMP-835 User Manual

Turning the Projector On

Turn the power on to start projecting images.
Caution
Be sure to read the Safety Instructions/World-Wide Warranty Terms
before projecting images.

Connecting the Power Cable

PROCEDURE
Check that the power is turned off for the projector
1
and, if necessary, that all components are connected
to the projector.
Connect the computer or other video source to the
2
projector. sp.19,
Remove the lens cover.
3
Place your fingers against the [ ] and [ ] on the lens cover
and press in while pulling the lens cover forward to remove it.
p.25
Connect the accessory power cable to the projector.
4
Check that the power connector is facing the same way as the
power inlet on the projector, and then insert the power cable
connector securely into the projector.
Connect the other end of the power cable to an
5
earthed electrical outlet.
TIP
When "Direct Power ON" in the configuration menu is set to "ON",
the projector's power can be turned on simply by connecting the
power cable.
The default setting is "OFF". s"Extented" - "Operation"
User's Guide
33
p.85